> >>I-7016D Module

I-7016D Module

I-7016D Module View larger

I-7016D Module

2-ch 4-wire Strain Gauge Input Module with LED Display using DCON Protocol (Blue Cover) (RoHS)

More details

I-7016D-CR

Login for see price and order.
In the industrial environment, there are numerous examples where force needs to be converted into a measurable electrical output. In most cases, a strain gauge or a load cell can be used. But the question is, how do we then deal with these electrical output measurements? In this situation, the I-7016 is definitely the No. 1 choice. Not only can the module process data from a load cell or a strain gauge, it also features linear mapping that can be used to directly convert the resulting data into weight via a user-defined correspondent table. The I-7016 supports full-bridge strain gauges and provides 2 Analog Input channels, 1 excitation voltage output channel, 1 Digital Input channels and 4 Digital Output channels. The module provides a programmable input range (±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, and ±2.5 V) and each Analog Input channel can be individually configured. Excitation voltage output can be in the range of 0 ~ +10 V, with a 40 mA driving efficiency. Digital Output channels can also be set as high or low alarm outputs. The M-7016 supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7016.

Features

ManufacturerICP-DAS
Series I-7000
Type Analog Input Strain Gauge
Interface RS-485
Protocol Serie
Resolution 16-bit
RS-485 Port(s) 1
Analog Input Channel(s) 2
Digital Input Channel(s) 1
Analog Output Channel(s) 1
Digital Output Channel(s) 4
Sampling Rate (Total) 10Hz for 1-channel mode
2Hz for 2-channel mode
Voltage & Current Input +/-150mV
+/-500mV
+/-1V
+/-5V
+/-10V
+/-20mA
Over Voltage Protection +/-5V
LED Display Yes
Sensor Input 4 Wire Strain Gauge
Input Linear Scaling Yes
Power Input 10 ~ 30 VDC
Operating Temperature -25 ~ 75°C
Mounting Wall Mount
Casing Plastic
RoHS Yes