> >>M-7088 Module

M-7088 Module

M-7088 Module View larger

M-7088 Module

8-ch PWM Output and 8-ch High-speed Counter Input Module (5 VDC) using DCON and Modbus Protocols (Gray Cover) (RoHS)

More details

M-7088-G-CR

Login for see price and order.
The I-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. In addition, all Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The M-7088 supports both the Modbus RTU and the DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7088. The I-7088(D)/S and M-7088(D)/S allows the load voltage to be increased from +3.5 to +50 V for the 8-channels PWM (Pulse Width Modulation) output and the 8-channels high-speed counter.

Features

ManufacturerICP-DAS
Series M-7000
Type Counter & Frequency
Interface RS-485
Protocol Modbus RTU
RS-485 Port(s) 1
Digital Input Channel(s) 8
Input Type Sink, Isolated
Digital Output Channel(s) 8
Output type TTL, Isolated
LED Display No
Maximum Count 32-bits
Max Frequency 1 MHz
Virtual Battery back up Yes
Power Input 10 ~ 30 VDC
Power consumption 2.4 W
Operating Temperature -25 ~ 75°C
Mounting Wall Mount
Casing Plastic
RoHS Yes