> >>Module M-7088

Module M-7088

Module M-7088 Agrandir l'image

Module M-7088

8 Entrées Compteur Haute Vitesse et 8 Sorties PWM

Plus de détails

M-7088-G-CR

Connectez-vous pour voir le prix et commander.
The I-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. In addition, all Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The M-7088 supports both the Modbus RTU and the DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7088. The I-7088(D)/S and M-7088(D)/S allows the load voltage to be increased from +3.5 to +50 V for the 8-channels PWM (Pulse Width Modulation) output and the 8-channels high-speed counter.

Caractéristiques

FabricantICP-DAS
Série M-7000
Type Entrée Compteur et Fréquence
Interface RS-485
Protocole Modbus RTU
Port(s) RS-485 1
Entrée(s) Digitale(s) 8
Type d'Entrée Sink, Isolated
Sortie(s) Digitale(s) 8
Type de Sortie TTL, Isolated
Afficheur LED Non
Décompte Maximum 32-bits
Fréquence Max. 1 MHz
Batterie virtuelle de back up Oui
Alimentation 10 ~ 30 VDC
Consommation 2.4 W
Température de fonctionnement -25 ~ 75°C
Fixation Mûrale
Boîtier Plastique
RoHS Oui